[Ⅰ] 原著学術研究論文 （2005年４月～）
( [ ] ：学協会誌論文，( ) ：校閲のある国際会議論文 ）
[1] Y. Ichida, R. Sato, Y. Morimoto and K. Kobayashi:
Material Removal Mechanisms in Non-contact Ultrasonic Abrasive Machining, WEAR, 258, (2005), pp.107-114.
[2] 森本喜隆，市田良夫，佐藤隆之介，小岩 聡：
砥石・工作物間の動的挙動観測に基づく砥石作用面剛性と減衰係数の算出，精密工学会誌， 71, 9, (2005), pp.1115-1119.
(3) R. Sato, Y. Ichida , Y. Morimoto, H. Kajino, K. Hoshino, M. Sato: Effects of Uniformity in Wheel Structure on Grinding Characteristics of Vitrified CBN Wheels, Proceedings of the Third International Conference on Leading Edge Manufacturing in 21st Century (LEM21), Vol.2, (2005.10), pp.667-672.
(4) Y. Ichida, R. Sato, Y. Morimoto, Y. Oosawa, N. B. Fredj: Formation Mechanism of Finished Surface in Ultra-High Speed Grinding with CBN Wheels, Proceedings of the Third International Conference on LEM21, Vol.2, (2005.10), pp.673-678.
(5) M.Fujimoto, Y. Ichida, R. Sato, Y. Morimoto:
Characterization of Wheel Surface Topography in CBN Grinding, Proceedings of the Third International Conference on Leading Edge Manufacturing in 21st Century (LEM21), Vol.2, (2005.10), pp.685-690.
(6) Y.Ichida, R. Sato, Y. Morimoto, Y. Inoue:
Profile Grinding of Superalloys with Ultrafine- Crystalline CBN Wheels, Proceedings of the Third International Conference on Leading Edge Manufacturing in 21st Century (LEM21), Vol.2, (2005.10), pp.691-696.
(7) Y.Morimoto, Y. Ichida, R. Sato, A. Saito:
Development of Fine-coarse Stage by Coaxial Arrangement of Two Stepping Motors, Proceedings of the Third International Conference on Leading Edge Manufacturing in 21st Century (LEM21), Vol.3, (2005.10), pp.957-962.
(8) T. Unno, Y. Morimoto, Y. Ichida, R. Sato:
Real-Time Synthesis and Control by Corrected Inverse Transfer Function of an NC Table, Proceedings of the Third International Conference on Leading Edge Manufacturing in 21st Century (LEM21), Vol.3, (2005.10), pp.963-968.
[9] Y. Ichida, R. Sato, Y. Morimoto, Y. Inoue:
Profile Grinding of Superalloys with Ultrafine- Crystalline cBN Wheels, JSME International Journal Series C, Vol.49, No.1, (2006.1), pp.94-99.
[10] Y. Ichida, R. Sato, Y. Morimoto, Y. Oosawa, N. B. Fredj:
Formation Mechanism of Finished Surface in Ultrahigh-Speed Grinding with cubic Boron Nitride (cBN) Wheels, JSME International Journal Series C, Vol.49, No.1, (2006.1), pp.100-105.
[11] M. Fujimoto, Y. Ichida, R. Sato, Y. Morimoto:
Characterization of Wheel Surface Topography in cBN Grinding, JSME International Journal Series C, Vol.49, No.1, (2006-1), pp.106-113.
[12] 市田良夫，佐藤隆之介，森本喜隆，笹沼 真：
ナノ研削に関する基礎研究－定圧研削におけるナノスケール除去作用－，精密工学会誌，72, 8, (2006.8), pp.988-993.
[13] 市田良夫，梶野 仁，佐藤隆之介，森本喜隆，佐藤政和：
cBNビトリファイドボンドホイールの研削性能に及ぼす組織均一化の影響－クラスタ研削試験に基づく砥粒切れ刃の挙動解析－，精密工学会誌，72, 9, (2006.9), pp.1128-1133.
[14] 市田良夫，梶野 仁，佐藤隆之介，森本喜隆，佐藤政和，大川洋之：
cBNビトリファイドボンドホイールの気孔の形態と均一性について，精密工学会誌，72, 11, (2006-11), pp.1423-1428.
[15] 市田良夫，上野秀雄，森本喜隆，佐藤隆之介，清水克哉：
cBNホイールのマイクロドレッシングに関する研究，砥粒加工学会誌，50, 4, (2006.4), pp.211-216.
[16] 森本喜隆，市田良夫，佐藤隆之介，横田 肇：
傾斜ドレッシング法を用いた砥石面性状の改善に関する研究－基本原理の提案とその効果－，砥粒加工学会誌，50, 11, (2006.11), pp.654-659.
(17) R. Sato, Y. Ichida, Y. Morimoto, K. Shimizu:
Chemical Mechanical Polishing for Oxygen Free Copper with Manganese Oxide Abrasives, Proceedings of the 4th Int. Conference on Leading Edge Manufacturing in 21st Century (LEM21), (2007.11), pp.73-78.
(18) Y. Ichida, R. Sato, M. Fujimoto, H. Tanaka:
Fractal Analysis of Cutting Edge Wear in Superabrasive Grinding, Proceedings of the 4th Int. Conf. on Leading Edge Manufacturing in 21st Century (LEM21), (2007.11), pp. 363-368.
(19) M. Fujimoto, Y. Ichida, R. Sato:
Wear Characteristics of Vitrified cBN Grinding Wheels, Proceedings of the 4th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), (2007.11), pp.369-374.
(20) K. Koshikumo, Y. Ichida, R. Sato, Y. Morimoto:
Material Removal Mechanism in Ultrahigh-Speed Grinding with cBN Wheels, Proceedings of the 4th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), (2007.11), pp.381-386.
(21) Y. Ichida:
Profile Grinding of High-Speed Steels using Ultrafine-Crystalline cBN Wheels, Proceedings of the 4th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), (2007.11), pp.387-392.
(22) S.Habu, Y. Ichida, H. Ueno:
Study on Grindability of Fine Ceramics, Proceedings of the 4th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), (2007.11), pp.393-398.
(23) Y. Morimoto, Y. Ichida, R. Sato, Y. Ohori:
Development of Cutting Device with Enlargement Mechanism of Displacement-Application of Non-circle Cutting-, Proceedings of the 4th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), (2007.11), pp.785-790.
(24) T. Unno, Y. Morimoto, Y. Ichida, R. Sato:
Compensation of Machined Profile at Quadrant Motion by Real-Time Corrected Inverse Transfer Function, Proceedings of the 4th International Conference on Leading Edge Manufacturing in 21st Century (LEM21), (2007.11), pp.803-808.
[25] 藤本正和，市田良夫，佐藤隆之介，森本喜隆：
cBN砥粒切れ刃のマイクロ自生作用，精密工学会誌, 73, 12, (2007), pp.1319-1324.
[26] Y. Ichida, Y. Morimoto, R. Sato:
Affected Layer Evaluating of Ultraprecise Machined surface using Magnetic Force Microscopy, International Journal of Machining and Machinability of Materials, 2, 1(2007), pp. 97-107.
[27] 海野 徹，森本喜隆，市田良夫，佐藤隆之介：
工作機械の送りテーブルの実時間動特性計測とそれに基づく軌跡制御－円弧補間加工における象限突起の抑制効果－，精密工学会誌, 74, 1, (2008), pp.72-76.
[28] 藤本正和，市田良夫，佐藤隆之介：
cBN研削における切れ刃摩耗挙動のフラクタル解析，精密工学会誌，74, No.5, (2008), pp.468-473.
[29] Y. Ichida:
Mechanical Properties and Grinding Performance of Ultrafine-Crystalline cBN Abrasive Grains, Diamond and Related Materials, Vol.17, Issues 7/10, (2008), pp.1791-1795.
[30] M. Fujimoto, Y. Ichida:
Micro Fracture Behavior of Cutting Edges in Grinding using Single Crystal cBN Grains, Diamond and Related Materials, Vol. 17, Issues 7/10, (2008), pp.1759-1763.
[31] 海野 徹，森本喜隆，市田良夫，佐藤隆之介：
摩擦力を考慮した円弧補間運動の実時間逆伝達関数制御，精密工学会誌，74, 6, (2008.6), pp.616-621.
(32) Y. Ichida, R. Sato, H. Ueno, S. Nagao:
High-Efficiency Mirror Grinding using Ultrafine-Crystalline cBN Grains, Proceedings of 10th Anniversary International conference of the European Society for Precision Engineering and Nanotechnology, Zurich, Switzerland, Vol.1, (2008.5), pp.68-72.
(33) Y. Ichida, D. Kou, R. Sato:
Nanometrology of Fine Si Patterns Having a Rectangular Profile using AFM Carbon Nanotube Probes, Proceedings of 10th Anniversary International conference of the European Society for Precision Engineering and Nanotechnology, Zurich, Switzerland, Vol.2, (2008.5), pp.312-316.
[34] 海野 徹，森本喜隆，市田良夫，佐藤隆之介：
摩擦力を考慮した円弧補間運動の実時間逆伝達関数制御－円弧補間加工における象限突起の抑制効果－，先端加工学会誌，Vol.26, No.1, (2008.1), pp.33-38.
(35) Y. Ichida, R. Sato, H. Kajino:
Development of Ultrafine-Crystalline cBN Abrasive Grains for Innovative Grinding Technology, Proceedings of the 41th CIRP Conference on Manufacturing Systems-Manufacturing Systems and Technologies for the New Frontier-, Tokyo, (2008.5), pp.463-466.
[36] Y. Ichida:
Creep Feed Profile Grinding of High-Speed steel using Ultrafine-Crystalline cBN Wheels, JSME, Journal of Advanced Mechanical Design, Systems and Manufacturing, Vol.2, No.3, (2008.7), pp.385-395.
[37] Y. Ichida, R. Sato, M. Fujimoto, H. Tanaka:
Fractal Analysis of Cutting Edge Wear in Superabrasive Grinding, JSME, Journal of Advanced Mechanical Design, Systems and Manufacturing, Vol.2, No.4, (2008.7), pp.640-650.
[38] R. Sato, Y. Ichida, Y. Morimoto, K. Shimizu:
CMP Characteristics of Manganese Oxide Abrasive slurry for Oxygen Free Copper, JSME, Journal of Advanced Mechanical Design, Systems and Manufacturing, Vol.2, No.4, (2008.7), pp.685-693.
[39] M. Fujimoto, Y. Ichida and R. Sato:
Wear Characteristics of Vitrified cBN Grinding Wheels, JSME, Journal of Advanced Mechanical Design, Systems and Manufacturing, Vol.2, No.4, (2008.7), pp.570-578.
[40] Y. Morimoto, Y. Ichida, R. Sato and Y. Ohori:
Development of Cutting Device with Enlargement Mechanism of Displacement, JSME, Journal of Advanced Mechanical Design, Systems and Manufacturing, Vol.2, No.4, pp.474-481, (2008.7).
(41) Y. Ichida:
High-Efficiency Grinding of Cold-Work Die Steel with Ultrafine-Crystalline cBN Abrasive Grains, Proceedings of the 6th International Scientific and Technical Symposium on Manufacturing and Materials, Monastir, (2008), pp.47-53.
(42) Y. Ichida, M. Fujimoto, J. Akbari and R. Sato:
Evaluation of Cutting Edge Wear in cBN Grinding Based on Fractal Analysis, Proceedings of the 6th International Scientific and Technical Symposium on Manufacturing and Materials, Monastir, (2008), pp.287-294.
[43] Y. Ichida, R. Sato, M. Fujimoto and N. B. Fredj:
Fractal analysis of Self-Sharpening Phenomenon in cBN Grinding, Key Engineering Materials, Vols.389-390, (2009), pp.42-47.
[44] R. Sato, Y. Ichida, Y. Morimoto and K. Shimizu:
Polishing Characteristics of CMP for Oxygen Free Copper with Manganese Oxide Abrasives, Key Engineering Materials, Vols.389-390, (2009), pp.515-520.
[45] B. B. Fathallah, N. B. Fredj, H. Sidhom, C. Braham and Y. Ichida:
Effects of Abrasive Type Cooling Mode and Peripheral Grinding Wheel Speed on the AISI D2 Steel Ground Surface Integrity, International Journal of Machine Tools & Manufacture, Vol.49, Issues 3/4, (2009.), pp.261-272.
[46] 市田良夫，佐藤隆之介，J. Akbari：
cBNビトリファイドホイールのマイクロドレッシングによる切れ刃形成機構，砥粒加工学会誌，53, 4, (2009.4), pp.236-241.
(47) Masakazu Fujimoto, Yoshio Ichida, Yuichiro Inoue:
Microscopic Wear Behavior of Grain Cutting Edges in cBN Grinding, Proceedings of the 5th International Conference on Leading Edge Manufacturing in 21st Century, Osaka, Japan, (2009.12), pp.541-546.
(48) Yoshio Ichida, Masakazu Fujimoto, Yuichiro Inoue, Keisuke Matsui:
Development of High-Performance Vitrified Grinding Wheels using Ultrafine-Crystalline cBN Abrasive Grains, Proceedings of the 5th International Conference on Leading Edge Manufacturing in 21st Century, Osaka, Japan, (2009.12), pp.547-552.
(49) Yoshio Ichida, Takashi Yamaguchi, Makoto Sasanuma:
Mechanism of Material Removal in Nanomachining using AFM Diamond Tip, Proceedings of the 5th International Conference on Leading Edge Manufacturing in 21st Century, Osaka, Japan, (2009.12), pp.315-318.
[50] 垣生 茂，市田良夫，梶野 仁，佐藤政和：
ビトリファイドダイヤモンドホイールの摩耗特性と研削性能に関する研究-クラスタ研削試験による切れ刃摩耗挙動の基礎解析-，砥粒加工学会誌，54巻，3号, (2010.3) pp.157-163.
[51] 垣生 茂，市田良夫，梶野 仁，佐藤政和：
ビトリファイドダイヤモンドホイールの切れ刃摩耗挙動と作用面性状，砥粒加工学会誌，54巻，3号, (2010.3), pp.164-171.
[52] Y. Ichida, N. B. Fredj:
High-Efficiency Grinding of Cold-Work Die Steel with Ultrafine-Crystalline cBN Abrasive Grains, International Journal of Machining and Machinability of Materials, Vol.7, (2010).
[Ⅱ] 解説・総説 （2005.4～）
(1) 市田良夫：
CBNビトリファイドホイールの研削特性に及ぼす組織均一化の影響，精密工学会専門委員会第64回「超砥粒ホイールの研削性能に関する研究講演会」，明治大学, (2005.1), pp.1-7．
(2) 市田良夫：
マイクロ・ナノ加工技術の最新動向，機械の研究，57, 3, (2005.3) , pp.325-333．
(3) 市田良夫：
立方晶窒化ホウ素だよ，「はてな探検隊（宇大発 身近にある物理), No.15」，下野新聞, (2006.1.15).
(4) 市田良夫，佐藤隆之介，森本喜隆：
「ピラミッド構造研磨パッドの研磨特性」，砥粒加工学会次世代固定砥粒加工プロセス専門委員会第7回研究会，東京，（2006.5), pp.15-21．
(5) 市田良夫：
「AFMを用いたナノスケール除去加工・隆起加工について」，第5回 微細加工と表面機能研究分科会，宇都宮大学，（2006.9）．
(6) 市田良夫：
cBNホイールによる研削技術と高精度化，技術セミナー，日本テクノセンター，東京，（2007.3), pp.1-63．
(7) 市田良夫：
超微結晶cBNホイールの研削性能，2008年度精密工学会学術講演会秋季大会シンポジウム資料集「超砥粒ホイールの使用技術」，東北大学， (2008.9), pp.23-26.
(8) 市田良夫：
ダイヤモンド・CBN工具，日刊工業新聞，(2009.7.23).
(9) 市田良夫：
cBNホイールの作用面制御と精密研削技術，Proceedings of the 5th ELID Seminar，理化学研究所,（2009.12), pp.50-65.
(10)市田良夫：
cBNホイールの作用面制御と高能率鏡面研削，2010年度精密工学会学術講演会春季大会シンポジウム資料集「超砥粒ホイールの研削－過去，現在,そして未来へ」，埼玉大学, (2010.3), pp.34-37.